DL-R2000 Pneumatic ultrasonic embossing compound slitting and rewinding machine
1 .Equipment requirements: unwinding, embossing compounding, slitting, and winding are carried out at the same time. The end face is flat and smooth
2 .Applicable materials:
1 hot air non-woven fabric,
2 melt-blown non-woven fabric,
3 spunbond non-woven fabric, etc.
4 wood pulp non-woven fabric
Materials gsm :100-200gsm
3 . Effective width : 2000mm,Maximum diameter :<= 1000mm.
4. Equipped with 4 sets of feeding and unwinding devices, each with magnetic powder unwinding control tension device
5. The equipment is equipped with 8 sets of 153mm ultrasonic embossing compound and air-cooling devices, , and the ultrasonic working procedure adopts the automatic start and stop work designed by our company.
6 .The rewinding roller has a stepless speed change device, which can adjust the rewinding speed.,
7 .Machine speed: 13M/min
8.The rewinding device is equipped with the entire exhaust pressure. The compression adjustment device is equipped with air shaft for rewinding, and the product rewinding diameter is <=1000mm
10. The equipment is equipped with 7sets high-precision anodized aluminum alloy wrinkle rollers.
11.Stepless speed regulation, compound slitting and rewinding speed, count, 3 sets of upper and lower knives for online slitting, and the slitting size can be adjusted at will.
12 .The equipment slitting device adopts the straight-top pneumatic knife slitting system for slitting (the
pneumatic knife adopts the Taiwan Youju brand). The slitting bottom shaft is made of special die steel material and is finished.
13 .The equipment adopts frequency conversion control and speed regulation. The wiring of electrical parts is reasonable, safe, clean, and easy to operate. The total power is 30 kw.
14 . The whole frame is made of international formed steel, and the surface is treated with anti-rust treatment. All the table plates and sealing plates of the machine are made of stainless steel. The welding dimensions of the frame are accurate, the brackets are properly reinforced, and the centrality of the pulley and all transmission parts is accurate to ensure the smooth operation of the machine..
Main components of equipment and electrical appliance brands
,Magnetic Powder Tension Controller:5kg Ningbo
,Specifications of rubber rollers: diameter 137mm*length 2000mm, hardness 60.
,Frequency:SANJING 15kw , motor :10kw.
,Bearing:Hangzhou
,Pneumatic Components:SHENCHI
,Slitting knife:Youju Taiwan
,Ultrasonic: Shanghai
,Aluminum alloy guide roller:Guta Shanghai
Embossing roller :Die steel electric carving finishing production (patterns are made according to customer requirements) ,diameter 160mm× length 2000mm;
Equipment technical parameters
| Model |
DL-R2000 |
| Capacity |
40M/min |
| Cutting accuracy |
±1mm |
| Effective width(roller surface) |
2000mm |
| Width of the raw materials |
≤2000mm diameter:≤1000mm |
| ultrasonic |
15set(capacity 2500W/set) |
| Ultrasonic Die Specifications |
153mm |
| Feed frame |
8set |
| Cutting knife |
3 set |
| Embossing roller |
1 set+ 1 set for replacement (Cone pattern) |
| Feed shaft (air shaft) |
8set 3'inch |
| Re-wind shaft |
1 set 3'inch |
| Voltage |
380V/50Hz |
| Total Power |
3kw+22kw |
| Dimension |
7600mm×2450mm×2100mm L*W*H |
| Weight |
3500kg |
| Payment method |
T/T 50% Deposit,50% before shipping after tested |
| Warranty |
2 year |
| Delivery date |
After receive prepayment within 45days |
| Certificate |
CE/ISO9001/ISO14001 |
| |
|
| |
| |
Audited Supplier 
){kind=link}